Flat roofs are mostly adopted when constructing commercial buildings and normally have little to no slope. Generally, they are considered less costly compared to the sloped roofs which are common in residential buildings and come in different models. Flat roofs play the important role of protecting a building from exterior elements like adverse moisture. They also support the building’s mechanical and electrical equipment that serve the occupants.
Until late 20th century, flat roofs were only used in parts of a building where least damage would occur should there be any leak. Such places included sheds and porches. Roofing materials used then were not very durable and there were higher chances of leaks due to heavy rains or layers of ice and snow. However, today, modern materials and flat roof Bedford boasts of, have completely eliminated this problem.
Polyvinyl chloride
PVC roofing is a modern material for Flat Roof Bedford can offer any constructer. Polyvinyl chloride (PVC), absorbs less heat and is energy efficient than rubber membrane. Of all the roofing methods, it is the most puncture resistant and is also loved for its durability. To totally eliminate chances of leakages, it is hot air welded and so glue or tar is not used to seal the seams as done in other methods. The only major disadvantage that this Flat Roof Bedford can provide is its requirement for professional installation.
Spray foam
Spray foam roofing method uses polyurethane-based foam that covers the roof hence forming a protective surface. This kind of flat roof Bedford County can offer ensures that rigid sheets of foam insulation are fastened to the building’s structure. After that, by making use of a spray gun, foam solution is mixed and finally applied to the roof. For good drainage, the thickness of the form used varies across the entire roof. To again provide additional protection to the foam an elastomeric coating is sprayed over its surface. This coating also helps in water resistance and avoids the spread of fire in case of an emergency.
EPDM
For a real rubber Flat Roof Bedford offers ethylene propylene diene monomer (EPDM). This materials which look more like an inner tube, can withstand a lot of sun exposure. EPDM roofs are almost seamless with the material being fused together to form the needed cover. The material is also resistant to tearing and should any occur, it can be easily patched. This possibility helps much in combating any leakage issues. The protective UV used also keeps EPDM from degrading over a period of time.
Modified Bitumen
Polymer modified bitumen sheets is also another method that has been widely adopted. It consists of multiple layers of reinforced fabrics made to alternate between the sheets of modified bitumen. The modification changes the asphalt into a plastic or rubber-like material depending on the precise technique used. For this particular reason, sometimes these kinds of flat roof Bedford has is called rubber roof. The layers at the top may include mineral, aggregate and smooth liquid-applied surfacing or metal foil laminate. The pricing for this type of roof can be mid-range and is energy efficient due to the light coloured surfacing.
Home and Garden DIY